# Envelopes II: Making Spirals

While I don’t intend to make a habit of midweek posts (though thanks for the idea, Dane!), last week’s entry was so popular that I thought I’d write a short post on how the spiral designs are created.  Here’s one of last week’s images to refresh your memory.

These are not difficult to create,  but because of all the overlap of lines, it’s not immediately obvious how they are generated.  The image below shows the first forty line segments drawn, and highlights the endpoints of these segments.

The first line drawn is horizontal, and the endpoints are 180 degrees apart.   More lines are generated by having the orange endpoint (starting at the right) move 4 degrees counterclockwise, while the green endpoints (starting at the left) move just 3 degrees.  As a result, the endpoints of the second segment are just 179 degrees apart on the circle.  The orange endpoints start gaining on the green endpoints, closing the gap by 1 degree with each successive segment.

So the final spiral includes exactly 180 segments, which may be expressed in a form which may be easily generalized (and which is used in the Python code).  Note that the “180” on the left side of the equation represents the number of segments drawn, and the “180” on the right indicates the angular distance that the endpoints of the initial segment are separated on the circle.

$180 = \dfrac{180}{4-3}.$

All 180 segments are shown below, where the endpoints are retained to illustrate the process (although note that many endpoints are written over as the algorithm progresses).

The Python code is fairly short (here is the Sage link — look at some of the earlier posts about using Sage if you haven’t used it before). The only mathematics you need to understand is the standard conversion from polar to rectangular coordinates — it’s much easier to describe the endpoints first in polar coordinates since the radius of the circle is fixed and only the angles the endpoints make with the center of the circle change.

Finally, I include an image created with contrasting colors on the background as well.  Create your own version, and post as a comment!

### Vince Matsko

Mathematician, educator, consultant, artist, puzzle designer, programmer, blogger, etc., etc. @cre8math

## 4 thoughts on “Envelopes II: Making Spirals”

1. Rares Mircea says:

But what is general rule in making the spiral? For example I want one with more “circles”(spirals) than the first one

Like

1. Good question! You see above how the orange endpoints move 4 degrees, while the green endpoints move 3 degrees, giving 180/(4 – 3) = 180 segments. But if you moved the green endpoints 3.5 degrees instead, you would have 180/(4 – 3.5) = 360 segments, creating more “circles.” The closer you move 3.5 to 4, the more loops there will be to your spiral.

Like